250 kVA · 200 kW · 50 Hz

250 kVA diesel generator, 200 kW prime

The workhorse rating for factories, hotels, small data rooms and construction sites. Prime 200 kW / standby 220 kW, 400/230 V, Cummins, Perkins or Weichai power, silent canopy optional.

01What a 250 kVA set is for

Direct answer: a 250 kVA diesel generator delivers 200 kW continuous (prime) at 0.8 power factor and 400/230 V, 50 Hz, with a 275 kVA / 220 kW standby rating. It suits loads of 140–160 kW average — a mid-size factory, hotel, clinic, cold store, small data room or site office cluster — and is the most common single rating sold into Africa and the Middle East.
1

Typical applications

  • Factory standby and peak shaving
  • Hotel, hospital wing, shopping arcade
  • Cold storage and packing plants
  • Construction site offices and batching plants
  • Small data rooms and telecom sites
2

What it replaces

  • Two ageing 100 kVA units in parallel
  • A 200 kVA set running at 100% load
  • Rented units on long projects
3

When to step up

  • Two or more large motors starting together
  • Site above 2000 m or ambient over 45 °C
  • Planned expansion beyond 160 kW
  • Continuous 24/7 duty above 80% load

02Specification

Indicative configuration — final datasheet is issued per order with the exact engine and alternator model. 60 Hz version available at 220/127 V or 480/277 V.

ItemSpecification
Prime power (PRP)200 kW / 250 kVA at 0.8 pf
Standby power (ESP)220 kW / 275 kVA at 0.8 pf
Voltage / frequency400/230 V, 50 Hz, 3-phase 4-wire (60 Hz optional)
Engine optionsCummins 6LTAA8.9-G2 · Perkins 1306 series · Weichai WP10D
AlternatorStamford-type brushless, single bearing, IP23, class H insulation
ControllerDeep Sea DSE7320 or ComAp InteliLite AMF25, auto start on mains failure
Fuel consumption100% load 52 L/h · 75% 39 L/h · 50% 27 L/h
Fuel tank8-hour integral base tank (400 L), lockable, with level gauge
Noise (silent canopy)72 dB(A) at 7 m
Dimensions (silent)3600 × 1200 × 1900 mm
Weight (silent, wet)≈ 2600 kg
OptionsATS, parallel panel, containerised or trailer version, remote monitoring, oil-water separator, engine heater

Derating: above 1000 m altitude subtract 3–4% per additional 300 m; above 40 °C intake temperature subtract about 2% per 5.5 °C. At 2000 m a 250 kVA set performs like a 220 kVA set — size accordingly.

03What 200 kW can carry

Load typeTypical allowanceNote
Lighting, office, ITup to 180 kWResistive / electronic load, near-unity pf
Motors, direct-on-linesingle motor ≤ 90 kW3–7× starting current, voltage dip < 15%
Motors, star-delta or soft startsingle motor ≤ 132 kWStarting current limited to 2–3×
Welding, compressors, pumps140–160 kW totalKeep average load at 70–80%
UPS / rectifier load≤ 160 kWCheck harmonic distortion; THD filter may be needed

04Export configuration

CE

Compliance

CE declaration with 2000/14/EC noise marking, EPA Tier 4 Final on request for US non-road, SONCAP for Nigeria, SASO/SABER for Saudi Arabia, EAC for Russia and Central Asia, CoC at destination where required.

40

Loading

One 250 kVA silent set per 20 ft container; two units per 40 ft HQ with canopy removed or in open format. Gross weight per unit ≈ 2600 kg plus packing.

DOC

Documents

English operation and maintenance manual, factory load test report with video, packing list, certificate of origin, wiring diagram, spare-parts kit list.

SVC

After-sales

Commissioning guidance by video call, two local operators trained, remote controller diagnostics, wear-parts kit shipped with the unit (filters, belts, sensors).

05Buyer questions

How much load can a 250 kVA generator actually carry?

200 kW continuously at 0.8 pf (prime rating). For continuous duty keep average load at 70–80% — 140–160 kW — so motor starting and short overloads stay inside limits. The 275 kVA / 220 kW standby rating is for utility outage periods only.

How much fuel per hour?

About 52 L/h at 100% load, 39 L/h at 75%, 27 L/h at 50%. Specific consumption 0.21–0.24 L/kWh, so 150 kW for 8 hours burns roughly 260–290 litres.

What does it cost?

Indicative FOB China 2026: USD 18,000–28,000 for open or silent set, driven by engine brand, alternator brand and controller. ATS, parallel panel, container version and certification are quoted separately.

Can it start a 90 kW motor?

Normally yes, direct-on-line with no other load: a 90 kW motor draws 5–6× rated current for 3–8 seconds and a 250 kVA set absorbs it with voltage dip under 15%. If the motor starts loaded, or several start together, move to 300–350 kVA or fit a soft starter.

Confirm the rating against your load list

Send the equipment list — we return a sizing calculation, three configuration tiers and a FOB price within 24 hours.